|
ELECTRICAL DESIGNERS
Electrical Designers (Cable Design)
cables, harnesses
|
Job Reference:
C-GJ-CDES
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
One of our top clients in Lexington, MA has
two new long-term contract openings for
Electrical Designers--one is for a senior-
level designer with ten-plus years of
experience as a cable designer--the other
opening is for a junior-level designer with
0-5 years of experience. All applicants
MUST be US Citizens and be eligible to
receive Secret Security Clearances. All
work is on-site
RESPONSIBILITIES
- Produce full documentation of various
system interconnect (cable and harness)
designs based on rough sketches and/or
verbal instructions from staff.
- Develop logic diagrams, schematics,
design layouts, and basic calculations to
support design concepts.
- Produce finished manufacturing
documentation consisting of block diagrams,
schematics, cable drawings (including
connector selection), and wire diagrams
(including wire types/sizes and wire run
lists).
- Prepare engineering release and change
documentation, as well as assist
responsible engineer in producing
fabrication orders.
- Support the entire fabrication and
assembly process, as required.
REQUIREMENTS:
-Must have extensive (working knowledge for
Junior Designer) knowledge of
cables/harnesses, electro-mechanical
packaging, electrical manufacturing and
assembly methods, 3D & 2D CAD (Computer
Aided Design) software, PDM (Product Data
Management) software, drafting practices,
and ASME and IEEE standards.
-A minimum of ten (10) years experience as
a cable designer, including a minimum of
six (6) years experience on CAD, PDM, and
schematic capture software.
(for Junior Designer job, 0-5 years of
experience is fine)
-Experience on SolidWorks Electrical and/or PTC Creo Elements/Direct Drafting & Model Manager.
-Familiarity with ASME/IEEE standards and
established practices in aircraft, missile,
spacecraft and ground support equipment.
-Should be capable of developing own
concepts, design layouts, and basic
calculations to support design concepts.
Must have good communication skills,
require little or no supervision, and
possess good creative skills.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 3 years
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
DNC-EDC14/03/24999CDES
Electrical Designer, Facilities
|
Job Reference:
C-GJ-FACED
(Please use reference when applying for this job)
|
Location:
|
One of our top clients has an urgent long-
term contract need for an Electrical
Designer with strong facilities experience.
All work to be performed on-site in the
Bedford/Lexington area.
Responsibilities:
-Follow applicable codes and standards
while implementing electrical system
designs and preparing working drawings and
specifications under the supervision of an
engineer
-Select and size materials, fixtures and
equipment (including conduit and wire)
based upon performing necessary
calculations and other design criteria and
standards
-Make field investigation to determine the
nature of existing conditions, resolve
design and implementation issues, verify
satisfactory results, coordinate work with
other disciplines, perform start-up, etc.
-Prepare cost estimates based upon
conceptual designs, final designs and other
criteria -Prepare basic technical specification for
equipment/material procurement and
installation by a construction contractor
-Review shop drawings submittals for
compliance with the drawings and
specification and recommending
approval/disapproval by the engineer.
Qualifications:
-Must have experience with AutoCAD
computerized drafting
-Applicant should have an Associates Degree
in Electrical Engineering from a technical
school or equivalent experience
-Ten years or more experience in the design
and installation of in-plant facilities
associated with research laboratories,
clean rooms, computer rooms, and office
buildings is required.
-Should have experience working for a
consulting engineering or architectural
engineering firm or organization
-Knowledge and experience with computer
software applications (e.g. spreadsheets)
is highly desirable
-Applicant should be experienced with
medium and low voltage power systems,
lighting systems, preventative maintenance
procedures, fire detection, suppression
systems, security systems, and power
monitoring system.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration:
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
DNC-EDC08/06/20500FACED
Electrical Designer
|
Job Reference:
C-GJ-ElecDes
(Please use reference when applying for this job)
|
Location:
|
SUMMARY
One of our longest standing clients has an
urgent new need for an Electrical Designer
with at least 10 years of experience in
general electro-mechanical packaging and
equipment design for high reliability or
ruggedized applications. The Electrical
Designer will design the electronics,
cabling and mechanical subsystems for a
robotic navigation and control payload that
will be deployed on a military vehicle.
This long-term contract opportunity is a
full-time, on-site position at our client
in the Bedford/Lexington area. Generous
flex time is available!
KNOWLEDGE/SKILLS REQUIREMENTS
-Candidate must be familiar with design
techniques for ruggedizing electronics
assemblies against shock, temperature and
moisture. -Experience with CAD packages such as
AutoCad or ProE is required.
-Familiarity with high reliability
electronic cabling and connector systems is
required.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 10+ years
|
Duration: 5+ months
|
Pay Rate: competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
DNC-EDC08/04/07500ElecDes
Electrical Designer
|
Job Reference:
C-GJ-ELECDSN
(Please use reference when applying for this job)
|
Location: Lexington MA
|
We have several contract openings with long-term potential at our client site in Lexington, MA for Electrical Designers with CAD experience to work on DOD projects in a high-level engineering environment.
These are design positions, not engineering positions.
You must be eligible to obtain a DOD security clearance.
If you think you may have already applied to this position in the past, please send an updated resume or email your availability.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 4 Years
|
Duration: 6 - 9 Months
|
Pay Rate: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
DNC-EDC05/06/30500ELECDSN
Electrical Designers
|
Job Reference:
C-GJ-ED999
(Please use reference when applying for this job)
|
Location: MA, NH, RI
|
We have ongoing needs for
Electrical Designers
with a minimum of
4-5
years of experience.
If you do not see an opportunity that fits your background, please contact us to discuss our other job openings and register for future needs.
Call 617-441-8777 Ext. 6 for details or
e-mail your resume now!
|
Experience Level: 4-5 Years
|
Duration: Varies
|
Pay Rate: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
Electrical Designers
|
Job Reference:
P-GJ-ED999
(Please use reference when applying for this job)
|
Location: MA, NH, RI
|
Our clients frequently have openings for
Electrical Designers
with a minimum of
4-5
years of experience.
If you do not see an opportunity that fits your background, please contact us to discuss our other job openings and register for future needs.
Call 617-441-8777 Ext. 6 for details or
e-mail your resume now!
|
Experience Level: 4-5 Years
|
Salary: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
|
